DSF-CFL (S/N: 160500625)
DSF-6000 (S/N: 161000324)
DBM-600 (S/N: 151200619)
DBM-600T (S/N: 160300572)
Designed for customers with higher production demands, the Duplo DSF-6000 Sheet Feeder offers a high stacking capacity of 24” for maximum productivity and an increased flexibility with paper sizes. Configurable with the DBM-600 Bookletmaker or iSaddle, the DSF-6000 Sheet Feeder offers the ultimate solution for converting pre-collated digital or offset printed media into high quality booklets at up to 4,500 per hour.
ADVANCED FEED SYSTEM
Equipped with a technologically-advanced feeding and Air Management System, the DSF-6000 provides an unsurpassed level of high-speed performance that ensures consistent feeding of a wide variety of paper types and weights, from 64 gsm to 300 gsm, at a maximum speed of up to 600 sheets per minute. The main tray offers a loading capacity of 24” (610 mm), which minimizes reloading for longer run times. Three-side air separation and an integrated static eliminator effectively minimize the effects of static that is common with digitally printed media. Optical and ultrasonic sensors accurately detect feed errors, should they occur.
The 600i Pro Digital Booklet System is Duplo’s flagship sheet feeding and bookletmaking system, integrating the DSF-6000 High-Speed Sheet Feeder with the DBM-600 Bookletmaker. With exceptional accuracy and automation, the 600i Pro Digital Booklet System offers the ultimate solution for converting short to long run, pre-collated digital or offset printed media into high quality booklets.
Equipped with a technologically-advanced Air Management System, the DSF-6000 provides an unsurpassed level of high speed performance that ensures consistent feeding of a wide variety of paper types and weights, from 64 gsm to 300 gsm, at a speed of up to 600 sheets per minute. The main tray offers a loading capacity of 24” (610mm), which minimizes reloading by supporting longer run times. Three-side air separation and integrated static eliminator effectively handle the static common with digitally printed media. Optical and ultrasonic sensors accurately detect feed errors, should they occur.
Utilizing state-of-the-art technology to automate and streamline the bookletmaking process, the DBM-600 Bookletmaker requires minimal operator intervention. Users can produce saddle, side, or corner-stitched booklets as well as letter landscape applications up to 4,500 booklets per hour.
Features
DSF-6000 Sheet Feeder | |
Maximum Loading Capacity | 24.02”/610mm |
Maximum Width | 14.33”/364mm |
Maximum Length | 20.66”/525mm |
Minimum Width | 4.73”/120mm |
Minimum Length | 8.27”/210mm |
Paper Weight | 64-300gsm fine quality and coated |
Buffer Capacity | 10 sheets or less (0.06”/1.5mm thickness or less) |
Maximum Set Speed | Up to 4,500 (4 sheets LTR SEF); DBM-600 and iSaddle |
DBM-600 Bookletmaker | |
Signature Bookletmaking | |
Sheet Size | 4.13” x 6.69” to 14.33” x 25.19” |
Folding Capacity | Up to 30 sheets |
Stitching Capacity | Up to 50 sheets |
Side/Side Stitch & Fold | |
Sheet Size | B5 LEF, A4 SEF, A4 LEF, A4SR SEF, A4SR LEF, LTR SEF, LTR LEF, LGL SEF, LGL LEF, B4 SEF, B4 LEF |
Corner Stitch | |
Sheet Size | B5 LEF, A4 SEF, A4 LEF, A4SR SEF, A4SR LEF, LTR LEF , LGL SEF, LGL LEF, B4 SEF |
Speed | Up to 5,200 sets per hour |
Stitch Positions | Saddle, corner, side, fold only, side stitch, and fold |
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
6. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
7. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
8. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
9. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
10. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
11. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
12. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
13. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
14. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.