Buyers Premium: 10.00%
Features of the HD-25 Industrial Series
Here are the features that contribute to making a machine people naturally call a "Workhorse".
Intelligent heat controllers: These heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
Laminating and pull rollers: These rollers are covered with quality silicone rubber for superior release quality, higher lamination quality, and easier cleaning. The laminating rollers and pull rollers are interchangeable.
Removable heat shoes: These shoes are teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
Built-in retractable slitters: These slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
Dual tension knobs: The dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
Forced air cooling: Cooling is essential when running thicker films, because the lamination needs to be cooled to get good results.
Easy access controls: The controls are conveniently located and grouped for effective operation.
Safety guard: A safety guard is built into the feed tray to help insure it will always be in place when laminating.
Upper and lower rollers are driven: Both the upper and lower rollers are driven to minimize the wrinkling or curling that can occur when only one roller is driven.
Made in the U.S.A.: The HD-25 is made in the U.S.A., making parts a lot closer to you should they be needed.
All electrical components conform to NRTL standards
Max Lamination Width: 25”
Speed: 0-25 FPM
Laminating Roller Diameter: 1 ½”
Supply Roll Core Size: 3” Standard
Laminating Film Thickness: To 10 MIL
Max. Laminating Thickness: ½”
Max. Film Roll Diameter: Top 13 ½”, Bottom 14”
Dimensions: 38” L 51” H 25” D
Weight: 285 lbs
Electrical: 208-240V, Single Phase, 16 amps, 50/60 Hz, 3000 watts
Motor: 12/4 HP DC
D & K ACCU II HS CUTTER
Accu II High Speed Cutter offers perfect precision flush cutting that is accurate within +/- .010. The Accu II Cutter features an advanced servo motor that provides incredible accuracy with less maintenance.
Accuracy within +/- .010”
Automatic or operator-controlled speed
Closed loop servo-driven pull rollers
Easy to use LED display
Adjustable side guides
Heavy duty exit table